Abit KV7-V Uživatelský manuál

KV7 Series (KV7, KV7-V) AMD Athlon XP System Board Socket 462 User’s Manual 4200-0380-12 Rev. 1.01

2-2 Chapter 2 This motherboard provides a ZIF (Zero Insertion Force) Socket 462 to install AMD Socket A CPU. The CPU you bought should have a kit of

Hardware Setup 2-3 2-3. Install System Memory This motherboard provides 3 184-pin DDR DIMM sites for memory expansion available from minimum 128MB t

2-4 Chapter 2 2-4. Connectors, Headers and Switches Here we will show you all of the connectors, headers and switches, and how to connect them. Plea

Hardware Setup 2-5 (2). FAN Connectors These 3-pin connectors each provide power to the cooling fans installed in your system. The CPU must be kept c

2-6 Chapter 2 (3). CMOS Memory Clearing Header This header uses a jumper cap to clear the CMOS memory. • Pin 1-2 shorted (default): Normal operatio

Hardware Setup 2-7 S2K Mode Select Header (For KV7 only) (4). This header uses a jumper to select the S2K mode. Short pin-2 and pin-3 for “Strapping

2-8 Chapter 2 (5). Wake-up Header These headers use a jumper cap to enable/disable the wake-up function. • PS2-PWR1: Pin 1-2 shorted (default): Disa

Hardware Setup 2-9 (6). Front Panel Switches & Indicators Headers This header is used for connecting switches and LED indicators on the chassis

2-10 Chapter 2 (7). Additional USB Port Headers These headers each provide 2 additional USB 2.0 ports connection through an USB cable designed for U

Hardware Setup 2-11 (8). Front Panel Audio Connection Header This header provides the connection to audio connector at front panel. • To use the au

Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of th

2-12 Chapter 2 KV7-V: Pin Pin Assignment Pin Pin Assignment 1 Audio Mic. 2 Ground 3 Audio Mic. Bias 4 VCC 5 Speaker Out Right Channel 6 Speaker

Hardware Setup 2-13 (9). Internal Audio Connectors These connectors connect to the audio output of internal CD-ROM drive or add-on card. (10).

2-14 Chapter 2 (11). Floppy Disk Drive Connector This connector supports two standard floppy disk drives via a 34-pin 34-conductor ribbon cable. Conn

Hardware Setup 2-15 (12). IDE Connectors This motherboard provides two IDE ports to connect up to four IDE drives at Ultra ATA/100 mode by Ult

2-16 Chapter 2 (13). Serial ATA Connectors These connectors are provided to attach one Serial ATA device at each channel via Serial ATA cable. A RAID

Hardware Setup 2-17 (14). Back Panel Connectors KV7: KV7-V: • Mouse: Connects to PS/2 mouse. • Keyboard: Connects to PS/2 keyboard. • LPT1: Conn

2-18 Chapter 2 • AUDIO2: (KV7-V) Mic-In: Connects to the plug from external microphone. Line-In: Connects to the line out from external audio source

BIOS Setup 3-1 Chapter 3. BIOS Setup This motherboard provides a programmable EEPROM that you can update the BIOS utility. The BIOS (Basic Input/Out

3-2 Chapter 3 3-1. SoftMenu Setup The SoftMenu utility is ABIT’s exclusive and ultimate solution in programming the CPU operating speed. All the para

BIOS Setup 3-3 NOTE: Some processors might have this multiplier factor locked, so there is no way to choose a higher multiplier factor. Power Supply:

Table of Contents Chapter 1. Introduction ... 1-1 1-1. Features & Spec

3-4 Chapter 3 3-2. Standard CMOS Features This section contains the basic configuration parameters of the BIOS. These parameters include date, hour,

BIOS Setup 3-5 IDE Primary Master / Slave and IDE Secondary Master / Slave: When set to [Auto], the BIOS will automatically check what kind of IDE dr

3-6 Chapter 3 [CGA 40]: (Color Graphics Adapter) Power up in 40-column mode. [CGA 80]: (Color Graphics Adapter) Power up in 80-column mode. [Mono]: (

BIOS Setup 3-7 3-3. Advanced BIOS Features Hard Disk Boot Priority: This item selects the hard disks booting priority. By pressing <Enter> ke

3-8 Chapter 3 Boot Up NumLock Status: This item determines the default state of the numeric keypad at system booting up. [On]: The numeric keypad fun

BIOS Setup 3-9 Report No FDD For OS: When set to [Enabled], this item allows you to run some older operating system without floppy disk drive. Leave

3-10 Chapter 3 Current FSB Frequency: This item will show you the current system front side bus speed. Current DRAM Frequency: This item will show yo

BIOS Setup 3-11 it to 2T Command for system compatibility or to 1T Command for system performance. Write Recovery Time: Two options are available: 2T

3-12 Chapter 3 AGP Aperture Size: This option specifies the amount of system memory that can be used by the AGP device. The aperture is a portion of

BIOS Setup 3-13  Back to Advanced Chipset Features Setup Menu: CPU & PCI Bus Control: Click <Enter> key to enter its submenu: PCI Master

3-9. Load Fail-Safe Defaults ...3-24 3-10. Load Optimized Defaults ...

3-14 Chapter 3 3-5. Integrated Peripherals OnChip IDE Device: Click <Enter> key to enter its submenu: IDE Prefetch Mode: Two options are avai

BIOS Setup 3-15 [Auto]: The BIOS will select the best available mode after checking your disk drive. [Mode 0-4]: You can select a mode that matches y

3-16 Chapter 3  USB Mouse Support Via: This item allows you to select [BIOS] for using USB mouse in DOS environment, or [OS] in OS environment. 

BIOS Setup 3-17 Onboard FDD Controller: Two options are available: Enabled and Disabled. The default setting is Enabled. You can enable or disable th

3-18 Chapter 3 [Power Off]: When power returns after an AC power failure, the system’s power remains off. You must press the Power button to power-on

BIOS Setup 3-19 PS2MS Wakeup: This item controls the PS2 mouse to wake up the system that has been powered down. Resume by OnChip USB: Two options ar

3-20 Chapter 3 IRQ Activity Monitroing: Click <Enter> key to enter its submenu: All Interrupt Event: Two items available: Off or Manual. The d

BIOS Setup 3-21 3-7. PnP/PCI Configurations Force Update ESCD: If you want to clear ESCD data next time you boot up, and ask the BIOS to reset the s

3-22 Chapter 3  Back to PnP/PCI Configurations Setup Menu: PCI/VGA Palette Snoop: This item determines whether the MPEG ISA/VESA VGA cards can work

BIOS Setup 3-23 3-8. PC Health Status CPU Shutdown Temperature: This item sets the temperature that would shutdown the system automatically in orde

Introduction 1-1 Chapter 1. Introduction 1-1. Features & Specifications 1. CPU • Supports AMD AthlonXP/Sempron Socket 462, 266/333/400MHz FSB

3-24 Chapter 3 All Voltages, Fans Speed and Thermal Monitoring: These unchangeable items list the current status of the CPU and environment temperatu

Install VIA 4-in-1 Driver A-1 Appendix A. Install VIA 4-in-1 Driver NOTE: Please install this VIA 4-in-1 driver first after having installed the Win

A-2 Appendix A Click [Next]. 6. 7. Choose [Yes, I want to restart my computer now.], and click [OK] to complete setup. KV7 Series

Install Audio Driver B-1 Appendix B. Install Audio Driver KV7: The installation procedures and screen shots in this section are based on Windows 20

B-2 Appendix B KV7-V: The installation procedures and screen shots in this section are based on Windows XP operating system. For those of other OS, p

Install LAN Driver C-1 Appendix C. Install LAN Driver The installation procedures and screen shots in this section are based on Windows XP operatin

C-2 Appendix C C-2 Appendix C KV7 Series KV7 Series

Install VIA USB 2.0 Driver D-1 Appendix D. Install VIA USB 2.0 Driver NOTE: This VIA USB 2.0 driver package requires Windows XP SP1 (Service Pack 1)

D-2 Appendix D D-2 Appendix D KV7 Series KV7 Series

Install Serial ATA RAID Driver E-1 Appendix E. Install Serial ATA RAID Driver The installation procedures and screen shots in this section are base

1-2 Chapter 1 9. Back Panel I/O • 1x PS/2 keyboard, 1x PS/2 mouse • 1x Serial port connector, 1x Parallel port connector • 1x AUDIO1 connector (R

E-2 Appendix E 6. Choose [Yes, I want to restart my computer now.], and click [Finish] to complete setup. KV7 Series

ABIT EQ (The Hardware Doctor Utility) F-1 Appendix F. ABIT EQ (The Hardware Doctor Utility) The installation procedures and screen shots in this se

F-2 Appendix F 6. This screen appears. ABIT EQ shows you the status of Voltage, Fan Speed, and Temperature readings as well. (The item names in thi

FlashMenu (BIOS Update Utility) G-1 Appendix G. FlashMenu (BIOS Update Utility) The installation procedures and screen shots in this section are ba

G-2 Appendix G Click [OK]. 6. 7. This FlashMenu screen appears. You can easily update the BIOS from clicking [Update From File], [One Click LiveUp

Troubleshooting (Need Assistance?) H-1 Appendix H. Troubleshooting (Need Assistance?) Q & A: Q: Do I need to clear the CMOS before I use a new

H-2 Appendix H Q: How can I get a quick response to my request for technical support? A: Be sure to follow the guidelines as stated in the “Technic

Troubleshooting (Need Assistance?) H-3 Main instructions: To fill in this “Technical Support Form”, refer to the step-by-step instructions given belo

H-4 Appendix H  Technical Support Form  Company Name:  Phone Number:  Contact Person:  Fax Number:  E-mail Address: Model * BIOS ID #

How to Get Technical Support I-1 Appendix I. How to Get Technical Support (From our website) http://www.abit.com.tw (In North America) http://www.ab

Introduction 1-3 1-2. Layout Diagram (KV7) User’s Manual

I-2 Appendix I 4. Internet Newsgroups. They are a great source of information and many people there can offer help. ABIT's Internet News group,

How to Get Technical Support I-3 North America and South America ABIT Computer (U.S.A.) Corporation 45531 Northport Loop West, Fremont CA, 94538, U

I-4 Appendix I Poland ABIT Computer (Poland) Co. Ltd. Przedstawicielstwo w Polsce ul. Wita Stwosza 28, 50-149 Wrocław Tel: 48 71 780 78 65 / 66 Fax:

1-4 Chapter 1 1-3. Layout Diagram (KV7-V) KV7 Series

Hardware Setup 2-1 Chapter 2. Hardware Setup Before the Installation: Turn off the power supply switch (fully turn off the +5V standby power), or di